Behringer Xenyx QX2442USB Premium 24-Input 4/2-Bus Mixer
₨125,000
The Behringer XENYX QX2442USB is a versatile 24-channel mixer equally well suited for sound-reinforcement applications and project recording studios.
Key Features
- 10 XENYX Mic Preamps, 48V Phantom
- Klark Teknik Multi-FX Processor
- 2-In/2-Out USB Up to 16-Bit / 48 kHz
- British-Style EQs with Mid-Band Sweep
Out of stock
The Behringer Xenyx QX2442USB Premium Input Mixer is a versatile 24-channel mixer equally well suited for sound-reinforcement applications and project recording studios.
It employs ten, high-quality XENYX mic preamps to deliver a clear and natural sound with 130 dB of dynamic range, low distortion, and a wide frequency response extending from 10 Hz to 200 kHz. British-style.
3-band EQs provide warm and musical tone corrections for your vocals and instruments, while easy-to-use, “one-knob” compressors gently smooth out signal peaks for punchy and present bass lines, drums, and vocals that sit right in the mix.
The Behringer Xenyx QX2442USB Premium Input Mixer is packed with powerful features for getting the job done no matter the situation.
Should your singer prefer the convenience of performing without a mic cable, the mixer is wireless-ready with a USB jack on the top panel for connecting the Behringer ULM digital wireless microphone system (available separately).
The onboard multi-effect processor brings you the legendary Klark Teknik reverb effect as well as chorus, flange, delay, and pitch-shift, all great for adding depth and dimension to your mix.
There is also a built-in, stereo USB audio interface for recording your mix directly to a computer, at audio resolutions up to at 16-bit/48 kHz.
Behringer Xenyx QX2442USB Premium Input Mixer even comes with the recording and editing software needed to turn your computer system into a complete home recording studio.
A set of flexible routing and monitoring options makes it easy to integrate the Behringer Xenyx QX2442USB Premium Input Mixer into your existing set up.
The Behringer Xenyx QX2442USB Premium Input Mixer offers four aux sends per channel for sending signals to the FX processor or out of the console to other gear.
Behringer Xenyx QX2442USB Premium Input Mixer also comes with four stereo subgroups with separate outputs, channel inserts, direct outputs, eight aux returns, and more.
The main outputs carry the signal on both XLR and 1/4″ TRS balanced connectors, while the control room outputs are on two 1/4″ TRS balanced connectors.
Other features include clip LEDs to help you set the correct mic levels, mute and solo buttons, main-mix and subgroup routing switches, and PFL functions on all channels.
Designed to withstand the rigors of live gigs, the QX2442USB is built with long-wearing, 60mm logarithmic-taper faders and sealed rotary controls. There is even a lamp socket to connect a gooseneck lamp when working in low-light environments.
Key Features
- 10 high-quality, phantom-powered XENYX mic preamps for dynamic and condenser microphones
- 130 dB of dynamic range for high headroom
- Low-noise and low-distortion circuitry
- 8 studio-grade compressors with super-easy “one-knob” functionality and control LED
- Legendary Klark Teknik FX processor with LCD display, dual-parameters, Tap function, and storable user parameter settings
- 100 FX presets include reverbs, delays, modulation, and multi-effects
- Wireless-ready for Behringer ULM digital wireless microphone system (available separately)
- Built-in stereo USB audio interface to connect directly to your computer
- Free audio recording, editing, and podcasting software, plus 150 instrument/effect plug-ins downloadable at behringer.com
- Neo-classic, British-style 3-band EQs with semi-parametric mid band for warm and musical sound
- Channel inserts and direct outputs on each mono channel plus main mix inserts for flexible connection of outboard equipment
- 4 aux sends per channel: 2 pre-/post-faders and switchable for monitoring/FX applications, 2 post-faders for internal FX processor or as send to external FX processor
- Clip LEDs, mute, main mix and subgroup routing switches, solo, and PFL functions on all channels
- 4 subgroups with separate outputs for added routing flexibility
- 4 multi-functional stereo aux returns with flexible routing
- Control room/phones outputs with multi-input source matrix—record inputs assignable to main mix or control room/phones outputs
- Behringer Xenyx QX2442USB Premium Input Mixer
- Long-wearing 60mm logarithmic-taper faders and sealed rotary controls
- Lamp socket to connect a gooseneck lamp
- “Planet Earth” switching power supply for maximum flexibility (100-240 V), noise-free audio, superior transient response, and low power consumption for energy saving
- Designed and engineered in Germany
| Brand | |
|---|---|
| Microphone Inputs | 10 x XLR, balanced, discrete input circuit XENYX microphone preamps with 48 V phantom power (switchable) |
| Microphone EIN | (EIN 20 Hz to 20 kHz) At 0 Ohm Source Resistance: -134 dB / -136 dB A-weighted Frequency Response: <10 Hz to 150 kHz (-1 dB) Gain Range: +10 to +60 dB Maximum Input Level: +12 dBu at +10 dB gain Impedance: 2 kOhms, balanced Signal-to-Noise Ratio: 108 dB / 110 dB A-weighted (0 dBu In at +22 dB gain) Distortion (THD+N): 0.005% / 0.004% A-weighted |
| Line Inputs | 8 x 1/4" / 6.3 mm TRS, balanced Impedance: 20 kOhms balanced / 10 kOhms unbalanced Gain Range: -10 to +40 dB Maximum Input Level: 30 dBu |
| Frequency Response | Microphone Input to Main Out: |
| Stereo Line Inputs | 4 x pairs of 1/4" / 6.3 mm TRS, balanced Impedance: 20 kOhms balanced / 10 kOhms unbalanced Gain Range: -20 dB to +20 dB Maximum Input Level: +22 dBu |
| 2-Track I/O | Input: Output: |
| Equalization | Mono Channels: 3-band, semi-parametric EQs Stereo Channels: 4-band, fixed |
| Channel Inserts | 8 x 1/4" / 6.3 mm TRS, unbalanced (on mono channels) Maximum Input Level: +22 dBu |
| AUX Sends | 4 x 1/4" / 6.3 mm TRS, unbalanced Impedance: 120 Ohms (approximately) Maximum Output Level: +22 dBu |
| AUX Returns | 4 x pairs of 1/4" / 6.3 mm TRS, balanced Impedance: 20 kOhms, balanced, 10 kOhms unbalanced Maximum Input Level: +22 dBu |
| Main Outputs | 2 x XLR and 2 x 1/4" / 6.3 mm TRS, balanced Impedance: 240 Ohms balanced, 120 Ohms unbalanced Maximum Output Level: +28 dBu |
| Control Room Outputs | 2 x 1/4" / 6.3 mm TRS, balanced Impedance: 120 Ohms (approximately) Maximum Output Level: +22 dBu |
| Headphone Output | 2 x 1/4" / 6.3 mm TRS, stereo, unbalanced Impedance: 25 Ohms Maximum Output Level: +21 dBu, 150 Ohms (+25 dBm) |
| DSP | Type: Klark Teknik Converter: 24-bit Sigma-Delta Sample Rate: 40 kHz |
| USB Interface | Connector: USB Type-B Audio: Stereo I/O Converter: 16-bit Sample Rate: 48 kHz |
| Wireless Access Point | USB Dongle: Accepts signals from 2 x independent Behringer ULM mics |
| Noise | Main Mix at -∞, Channel Fader at -∞: -102 dB / -105 dB A-weighted Main Mix at 0 dB, Channel Fader at -∞: -85 dB / -88 dB A-weighted Main Mix at 0 dB, Channel Fader at 0 dB: -77 dB / -79 dB A-weighted |
| Power | Mains Voltage: 100-240 V, 50/60 Hz Power Consumption: 50 W Fuse: T 1.6 Ah, 250 V Mains Connectors: IEC receptacle |
| Dimensions (W x D x H) | 17.5 x 17.3 x 5.5" / 445 x 440 x 140 mm |
| Weight | 12.6 lb / 5.7 kg |
| Packaging Info | – |
| Package Weight | 16.4 lb |
| Box Dimensions (LxWxH) | 21 x 20.3 x 8.3" |
Only logged in customers who have purchased this product may leave a review.
- Behringer XENYX QX2442USB 24-Channel USB Mixer with Multi-FX Processor
- Power Cable
Related products
Reviews
There are no reviews yet.