Rode Complete Studio Kit with AI-1 Audio Interface, NT1 Microphone, SMR Shockmount, and Cables

The Rode Complete Studio Kit combines the AI-1 USB audio interface with the NT1 cardioid condenser microphone, the SMR advanced shockmount with pop filter, a premium XLR cable, a USB cable, and a copy of Ableton Live Lite to create an all-in-one solution for recording vocals and instruments in a project studio or while on the go.

Key Features
  • High-Speed USB Audio Interface
  • 24-Bit / 96 kHz
  • Premium Discrete Headphone Amplifier
  • Cardioid Condenser Microphone

66,000

Out of stock

Rode AI-1 Studio-Quality USB Audio Interface

The Rode AI-1 is a studio-quality audio interface well suited for recording vocals, instruments, and voice-overs into your Mac or Windows computer. The interface features a single, combo XLR-1/4″ input with phantom power, two balanced 1/4″ monitor outputs, and a single, discrete, studio-quality headphone output and level control. The device can operate in zero-latency monitoring mode, which connects the preamp directly to the headphone output for delay-free performance while recording. With the headphone input engaged, the two monitor outputs are bypassed. To engage the monitor outputs, simply remove the headphone plug from the jack.

The rugged aluminum body is finished with a satin black finish and features large rubber feet, which prevents the desktop interface from sliding about when engaged. The class compliant AI-1 requires no drivers and features a USB-C connector, which not only connect to your computer, but also provides powers as well. The Rode AI-1 ships with a USB cable and a license for Ableton Live Lite.

  • Desktop USB audio interface with low-noise Class-A discrete preamplifier
  • Sampling rate of up to 96kHz/24-bit
  • One combo XLR-1/4″ combo input
  • Two balanced 1/4″ monitor outputs
  • One discrete, studio-quality headphone output
  • Phantom power for condenser microphones
  • Zero-latency monitor mode
  • USB bus powered
  • USB Type-C connector for future proof operation
  • Rugged body with Satin Black Finish
  • Class compliant—no drivers required
  • Includes Ableton Live Lite
  • Includes USB cable

Rode NT1 Cardioid Condenser Microphone (Microphone Only)

The NT1 Cardioid Condenser Microphone from RODE is a large-diaphragm cardioid condenser microphone that features RODE’s HF6 1″ capsule. The HF6 is designed to provide a detailed midrange response with smooth highs and warm bass. The capsule itself is seated in a Rycote Lyre internal shockmount to help reduce vibration and handling noises.

The microphone’s electronics were designed from the ground-up for quiet performance, and allow the NT1 to have a low, 4.5 dB of self-noise. The body of the mic is machined from nickel-plated aluminum that is then coated in a ceramic layer that is electrostatically applied for a scratch-resistant finish. The NT1 includes the RM2 mic clip and has a 1-year limited warranty that extends to 10-years after registration with RODE.

Rode SMR Advanced Shock Mount for Large Diaphragm Condenser Mics

The Rode SMR is a professional-grade shock mount for large diaphragm condenser mics. Featuring a double-Lyre suspension system, the SMR enhances Rycote’s Lyre system by using a smaller inner Lyre to act as a tensioning element.

The SMR’s removable all-metal pop filter provides an integrated solution for plosive protection, that is washable and designed to last as long as the shock mount and microphone. The SMR’s clamping system design utilizes a large surface area, allowing for ample friction and weight handling, without the need for over-tightening of the locking thread. With the load distributed over a greater surface area, the clamping system is designed to better withstand the wear and tear of repeated use.

The SMR’s frame is made from an engineering grade reinforced polymer. Vibration force is evenly distributed around the outer frame via the wide mounting rails, increasing the effectiveness of the Lyre system.

A base nut is also included, suitable for all compatible Rode microphones.

Rode AI-1 Studio-Quality USB Audio Interface Specs

Max Sample Rate/Resolution

96 kHz / 24-Bit

Host Connection

USB Type-C

Analog I/O

1 x Combo XLR / 1/4" Input
2 x 1/4" (6.3 mm) Balanced Output
1 x 1/4" (6.3 mm) TRS Headphone Output

Phantom Power

+48 V

Digital I/O

None

MIDI I/O

None

Frequency Response

20 Hz to 20 kHz ±1 dB

Gain Range

Inputs:
0 to 45 dB

Max Output Level

Monitor Outputs:
-6 dBu

Headphone Output Power

24 mW into 32 Ohms
245 mW into 300 Ohms

Dynamic Range

104 dBu

EIN

-128 dBA

Sample Rates

44.1, 48, 88.2, and 96 kHz

Bit Depth

24-Bit

Latency

Zero-Latency Direct Monitoring

OS Compatibility

macOS 10.10 or Later
Windows 7 or Later

Rode NT1 Cardioid Condenser Microphone (Microphone Only) Specs

Operating Principle

Pressure Gradient

Capsule

Condenser

Diaphragm

1" / 25.40 mm

Polar Pattern

Cardioid

Frequency Range

20 Hz to 20 kHz

Maximum SPL

132 dB SPL

Impedance

100 Ohms

Sensitivity

-29 dB

Equivalent Noise Level

4 dB A-Weighted

THD

1%

Output Connectors

1 x 3-Pin XLR

Operating

Voltage 24 V
48 V

Length

7.36" / 187 mm

Diameter

1.97" / 50 mm

Rode SMR Advanced Shock Mount For Large Diaphragm Condenser Mics Specs

Dimensions

5.0 x 9.0 x 8.3" (130 x 220 x 210 mm)

Weight

9.2 oz (260 g)

Package Weight

1.37 lb

Box Dimensions (LxWxH)

10.2 x 7.9 x 4.75"

Reviews

There are no reviews yet.

Be the first to review “Rode Complete Studio Kit with AI-1 Audio Interface, NT1 Microphone, SMR Shockmount, and Cables”

  • Rode AI-1 Studio-Quality USB Audio Interface
  • USB Cable
  • Registration Card for Ableton Live Lite
  • Rode NT1 Cardioid Condenser Microphone (Microphone Only)
  • Rode Stand Mount for NTK/NT1000 & Condenser Microphones
  • Microphone Dust Cover
  • Rode SMR Advanced Shock Mount for Large Diaphragm Condenser Mics