Samson Resolv SE5 Two-Way Active 5″ Studio Monitor (Pair)

SKU: SARESSE5 Category: Tags: , , , , , , ,

Resolv SE5 Two-Way Active 5″ Studio Monitor from Samson features 70 watts of power, a dedicated power amp and an electronic crossover.

Key Features

  • 5″ Carbon Fiber Woofer and 1.25″ Tweeter
  • 70 Watts RMS
  • 1/4″ TRS and RCA Inputs
  • 4-Position High Frequency Lift Control


Out of stock

Resolv SE5 Two-Way Active 5″ Studio Monitor from Samson features 70 watts of power, a dedicated power amp and an electronic crossover. The 5″ woven carbon fiber woofer provides tight and controlled low frequency response, while its 1.25″ soft dome tweeter gives the high frequencies a natural sound without unwanted resonance. The Resolv SE5 also includes a 4-position high frequency lift control, allowing the monitor to be optimized for different mixing environments.

This Resolv’s enclosure is constructed of solid MDF. Inset into the panel is a time-aligned waveguide that allows for a wide listening area with minimum diffraction. The SE5 is AV shielded for seamless operation near CRT monitors and other sensitive electronics. The rear panel has a balanced 1/4″ TRS input as well as an unbalanced RCA input. Additionally, the front ports are slotted with rounded inner edges, helping reduce port noise at high SPLs.

When you’re finished recording, the audio reproduction capabilities of a Resolv SE5 monitor system enables you to mix and master tracks that will sound great on a wide range of playback systems. Designed to help you producing smooth, even mixes, each Resolv SE5 features a wide frequency response, well-balanced speaker and control for optimizing the system for different mixing environments. The results will always be a solid representation what your song will sound like on record. With Resolv SE5s, you’ll bring the experience of playing back your audio projects to a whole new level. Whether you’re listening back to music recordings or viewing multimedia productions, the audio will sound crystal clear and full of dynamics when pumped through these monitors. And above all, a Resolv SE5 monitor setup gives you the playback accuracy you need to experience all your recordings exactly the way they were designed.With a stylish elegance and precise engineering, Samson’s Resolv SE5 active studio reference monitor will produce audio playback with sparkling clarity and definition to complement any recording space. Samson Resolv SE5 Features: 2-way active studio reference monitor with ported tuned enclosure (sold individually) 70 watts of power 5-inch woven carbon fiber woofer 1.25-inch soft dome tweeter with neodymium magnet 50Hz-27kHz frequency response Active crossover with multi-pole design for linear response 4-position high frequency lift control Balanced 1/4-inch inputs, unbalanced RCA inputs AV shielded for use with sensitive electronics Solid MDF (Medium Density Fiberboard) construction.


Studio Monitor

Monitor Type

Active 2-Way


Bass-Reflex, Shielded


HF Driver: 1 x 1.25" / 3.17 cm Silk Dome Tweeter
LF Driver: 1 x 5" / 127 mm Carbon Fiber Woofer


HF Amplifier: Rated at 20 W
LF Amplifier: Rated at 50 W


Frequency Response

45 Hz to 27 kHz ± 3 dB

Protections and Limiting


Signal Processing


1 x HF Shelf: -2 to +4 dB at 4 kHz (2 dB Increments)


Crossover Frequency

3.2 kHz, 24 dB/Octave Slope

Crossover Type




1 x 1/4" (6.3 mm) TRS Balanced Analog Input (10 kOhms)
1 x RCA Unbalanced Analog Input


Power Consumption

125 W


Enclosure Material


Dimensions (W x H x D)

8.6 x 12.3 x 8" / 218 x 312 x 204 mm


15.2 lb / 6.9 kg

Packaging Info

Package Weight

18.9 lb

Box Dimensions (LxWxH)

17 x 12 x 11.6"

  • Samson Resolv SE5 Two-Way Active 5" Studio Monitor
  • Power Cable