Audio-Technica ATH-M20xBT Wireless Headphones Overview
With the addition of wireless capabilities, the Audio-Technica ATH-M20xBT Wireless Headphones from Audio-Technica are an introduction to the M-Series that can be more easily used inside and outside of the studio, compared to their wired counterpart. Whether you’re a pro or simply a music fan, this Bluetooth wireless version of the Audio-Technica ATH-M20xBT Wireless Headphones is made to deliver full-range, hi-fi audio reproduction using large, 40mm drivers with rare-earth magnets and copper-clad aluminum wire voice coils.
With a long battery life of up to 60 hours joining soft, noise-isolating earpads a padded headband, and integrated mobile-friendly technologies, you can comfortably enjoy your audio for days, whether it’s music, streaming video, gaming, or phone calls.
Low Latency Mode
The freedom of wireless headphones means that they are ideal companions for your smartphone or tablet, devices geared for more than just music. When streaming video with the Audio-Technica ATH-M20xBT Wireless Headphones, utilize low latency mode to ensure that the audio you hear remains in sync with the action you view onscreen.
Pair Two Devices with Multipoint
Simultaneous pairing with two different devices is possible thanks to supporting multipoint technology. This feature makes it seamless to switch between devices as needed, without having to constantly re-pair. So if you’re enjoying a game on your tablet, you can pause and quickly take an incoming phone call on your smartphone, then get back into the action when you’re done.
Go Wireless or Wired
The included 3.9′ audio cable lets you use these wireless over-ear headphones as traditional wired headphones. This is ideal for non-wireless devices and components, as well as for the times when your batteries run low when using a wireless device with a headphone jack.
Additional Features
- Built-in mic for hands-free calling
- Integrated controls for calls, playback, and volume
- Up to 3 hours of playback with just a 10-minute rapid charge
| Weight | 0.66 kg |
|---|---|
| Brand | |
| Headphone | – |
| Earpiece Design | Over-Ear (Circumaural), Closed-Back |
| Earpiece Connection / Wearing Style | Headband |
| Driver Type | Dynamic |
| Driver Size | 1.6" / 40 mm |
| Magnet Type | Neodymium |
| Voice Coil | Copper-Clad Aluminum Wire |
| Impedance | 36 Ohms |
| Active Noise Cancellation | No |
| Controls/Microphone Location | Controls: Left Earpiece |
| Performance | – |
| Microphone | – |
| Number of Mics | 1 |
| Type | Electret Condenser |
| Pickup Pattern | Omnidirectional |
| Frequency Response | 50 Hz to 20 kHz |
| Sensitivity | -42 dB at 1 kHz / 1000 mV/Pa |
| Wireless Connectivity | – |
| Wireless Modulation | Bluetooth: π/4 DQPSK, 8DPSK, GFSK |
| Supported Audio Codecs | AAC, SBC |
| Bluetooth Profiles | A2DP, AVRCP, HFP, HSP |
| Bluetooth | 5.0 |
| Wireless Range | 33' / 10.1 m (Bluetooth) |
| Frequency | Bluetooth: 2.4 GHz (2.402 to 2.48 GHz) |
| Bluetooth Transmitter Power | 10 mW |
| Wired Connectivity | – |
| Audio Connector to Source | 1 x 1/8" / 3.5 mm TRS Right-Angled |
| Audio Connector to Earpiece | 1 x 1/8" / 3.5 mm |
| Cable Length | 1 x 3.9' / 1.2 m (1/8" / 3.5 mm) |
| Battery | – |
| Battery Chemistry | Lithium-Ion Polymer (LiPo) |
| Runtime | 60 Hours (BT) |
| Quick Charging Times | 10 Minutes for 3 Hours |
| Recharge Time | 4 Hours |
| Charging Port | USB Type-C |
| Environmental | – |
| Operating Temperature | 41 to 104°F / 5 to 40°C |
| Physical | – |
| Color | Black |
| Weight | Headphones: |
| Packaging Info | – |
| Package Weight | 1.515 lb |
| Box Dimensions (LxWxH) | 9.6 x 9 x 4.8" |
Only logged in customers who have purchased this product may leave a review.
- Audio-Technica Consumer ATH-M20xBT Wireless Over-Ear Headphones (Black)
- 3.5mm Audio Cable (3.9')
- 3.5mm Audio Cable (3.9')
Related products
Reviews
There are no reviews yet.