Behringer XENYX 1002FX 10 Channel Audio Mixer with Effects Processor
₨22,000
The Behringer XENYX 1002FX is a mixer that offers clear and natural sound in a small and portable format.
Key Features
- 2 x XENYX Mic Preamps, 48 V Phantom
- 4 x Stereo Line Inputs
- 24-Bit, Dual-Engine Multi-FX Processor
- 130 dB of Dynamic Range
Out of stock
The Behringer XENYX 1002FX 10 Channel Audio Mixer is a mixer that offers clear and natural sound in a small and portable format.
With ten inputs, two high-quality XENYX mic preamps, a 60mm logarithmic-taper master fader, and a multi-FX processor, this versatile mixer is ideal for a wide variety of mix and recording applications, from small-stage gigs to home-studios, mid-size corporate events, and more.
The Behringer XENYX 1002FX 10 Channel Audio Mixer is quick to set up and operate with all connections and controls easily reachable on the top of the unit.
The first two input channels feature Behringer XENYX 1002FX 10 Channel Audio Mixer mic preamps on two XLR connectors, as well as two 1/4″ inputs for line-level signals. Switchable, onboard 48V phantom power allows you to plug in both dynamic and studio-grade condenser microphones.
A gain knob lets you adjust the input level and a clip LED alerts you if you are overdriving the input. British-style 3-band EQs provide warm and musical tone corrections for your vocals and instruments.
The four sets of stereo inputs each feature +4/-10 switches used to match the mixer’s input sensitivity to the incoming signal.
This helps avoid signal degradation when connecting stereo keyboards or playback devices to the mixer. Pan (or balance) and level controls are included for all channels.
The built-in, dual-engine multi-FX processor offers 100 presets including reverb, chorus, flanger, delay, pitch-shifter, and a variety of multi-effects.
Each channel is equipped with a post-fader FX send, which you can use to send signal to the FX processor or to an external processor. The FX-to-Main knob allows you to control the level of the effect in your main mix.
The 2-Track section provides an easy way to connect an external 2-track recorder and/or playback device. The 2-Track inputs are assignable to either the main mix or to the control room/phone outputs.
The main mix fader controls the signal at both the main outs and 2-Track output, while a dedicated knob adjusts the volume for the phone/control room outputs.
- Compact and versatile 10-channel analog mixer for small-stage gigs or mid-size corporate events
- Two quality Behringer XENYX 1002FX 10 Channel Audio Mixer with 130 dB of dynamic range
- Switchable 48V phantom power
- Behringer XENYX 1002FX 10 Channel Audio Mixer
- Two balanced mono line inputs
- Four balanced stereo pairs of line inputs
- Behringer XENYX 1002FX 10 Channel Audio Mixer
- 24-bit, dual-engine multi-FX processor with 100 presets including reverb, chorus, flanger, delay, pitch-shifter, and more
- Neo-classic, British-style 3-band EQs for warm and musical sound
- One mono post-fader FX-send knob per channel for internal FX processor and/or as send to external processor
- Main mix outputs and separate control room, phones, and stereo 2-Track outputs
- 2-Track inputs assignable to main mix or control room/phones outputs
- Mic channels with low-noise and distortion-free circuitry for natural sound reproduction
- Long-wearing 60mm logarithmic-taper master fader
- Designed and engineered in Germany
| Brand | |
|---|---|
| Microphone Inputs | 2 x XLR, electronically balanced, discrete input circuit XENYX microphone preamps with 48 V phantom power (switchable) |
| Microphone EIN | (EIN 20 Hz to 20 kHz) At 0 Ohm Source Resistance: -132.7 dB / 137 dB A-weighted Frequency Response: <10 Hz to 200 kHz (-1 dB) Gain Range: +10 to +60 dB Maximum Input Level: +12 dBu at +10 dB gain Impedance: 2.6 kOhms, approximately Signal-to-Noise Ratio: -107 dB / -111 dB A-weighted (0 dBu In at +22 dB gain) Distortion (THD+N): 0.005% / 0.003% A-weighted |
| Line Inputs | 2 x 1/4" / 6.3 mm TRS, electronically balanced Impedance: 20 kOhms balanced / 10 kOhms unbalanced (approximately) Gain Range: -10 to +40 dB Maximum Input Level: +20 dBu at 0 dB gain |
| Fade-Out/Crosstalk Attenuation | Main Fader Closed: 85 dB Channel Fader Closed: 88 dB |
| Frequency Response | Microphone Input to Main Out: |
| Stereo Line Inputs | 4 x pairs of 1/4" / 6.3 mm TRS, electronically balanced Impedance: 20 kOhms balanced / 10 kOhms unbalanced (approximately, +4 dBu operating level) Maximum Input Level: +22 dBu |
| Equalization | (EQ mono channels) Low: 80 Hz (±15 dB) |
| FX Send | 1 x 1/4" / 6.3 mm TRS, unbalanced Impedance: 120 Ohms (approximately) Maximum Output Level: +22 dBu |
| Main Outputs | 2 x 1/4" / 6.3 mm TRS, unbalanced Impedance: 120 Ohms (approximately) Maximum Output Level: +22 dBu |
| Control Room Outputs | 2 x 1/4" / 6.3 mm TRS, unbalanced Impedance: 120 Ohms (approximately) Maximum Output Level: +22 dBu |
| Headphone Output | 1 x 1/4" / 6.3 mm TRS, stereo, unbalanced Impedance: 150 Ohms (+25 dBm) Maximum Output Level: +19 dBu |
| Tape I/O | 1 x pair RCA, stereo, unbalanced CD/tape inputs 1 x pair RCA, stereo, unbalanced tape outputs |
| Noise | Main Mix at -∞, Channel Fader at -∞: -105 dB / -108 dB A-weighted Main Mix at 0 dB, Channel Fader at -∞: -94 dB / -97 dB A-weighted Main Mix at 0 dB, Channel Fader at 0 dB: -83 dB / -85 dB A-weighted |
| FX Section | Converter: 24-bit Sigma-Delta Sampling Rate: 40 kHz |
| AC Adapter | Input: 120 V, 60 Hz Output: 2 x 14.8 V, 2 x 500 mA |
| Dimensions (H x W x D) | 1.9 x 7.4 x 8.7" / 47 x 189 x 220 mm |
| Weight | 3.5 lb / 1.6 kg (approximately) |
| Packaging Info | – |
| Package Weight | 4.81 lb |
| Box Dimensions (LxWxH) | 13.2 x 10.5 x 4" |
Only logged in customers who have purchased this product may leave a review.
- Behringer XENYX 1002FX 10-Channel Audio Mixer with Multi-FX Processor
- PSU6-UL Power Supply
Related products
Reviews
There are no reviews yet.