NUX Overdrive Guitar Effect Pedal Buffer 2 Working Modes NOD-1 HORSEMAN

₨33,500

【 2 Working Modes 】 Gold mode(mimic of the classic gold centaur overdrive pedal); Silver mode(a powered version with an extended gain range).
【3 Control Buttons】 TREBLE(adjusts the high frequency level to make the sound dark or bright), OUTPUT(adjusts the output level), GAIN(adjusts overdrive effect under the gold mode; adjusts near-distortion effect under silver mode).
【True Bypass/ Buffer Bypass Modes】For running the pedal. Push and hold the footswitch and power up the pedal to select the True(Red LED indicator) or Buffer(Green LED indicator) bypass mode.
【Built-in OP-AMP Voltage-Converter 】Driving the 18V to OP-AMP. Higher voltage-supply orders-up more harmonious and more various sound effects.
【Clean Boost】The Horseman can be used as a clean boost via the gain and output controls. Dial-up a low-gain with a high output setting, and it adds mostly volume and minimal color to your sound.

SKU: NOD-1 Categories: Amplifiers & Effects, Multi-Effect Pedals Brand: Nux

Two in One Overdrive Pedal

One of the most sought-after dual overdrive pedals produced in the mid ’90s is now in one unique pedal design-with a pocket size. NUX NOD-1 Horseman Overdrive Pedal pays homage to the legendary Centaur pedal.

There are 3 dials for primary settings and 2 modes: Gold and Silver, and it offers massive headway usually requiring an 18v input.

NUX NOD-1 Horseman Overdrive Pedal ccUnique Design

The sound is based on the Centaur’s voltage converter circuit. But the Horseman’s characteristic design is crafted with a built-in OP-AMP voltage-converter driving the 18V to OP-AMP. Higher voltage-supply orders-up more harmonics, and convincingly reproduces the sound of this unique pedal.

Clean Boost

Another “classic” way to use the NUX NOD-1 Horseman Overdrive Pedal. Very useful when used in combination with the amplifiers drive channel (or any other drive pedal).

And, depending on the Gain – Output adjustment, it lets the Horseman be used as a clean boost. Dial-up a low-gain with a high output setting, and it adds mostly volume and minimal color to your sound.

Natural Distortion

Additionally, the controls can be set to distort the sound signal in the pedal, where two Schottky diodes can perform a waveform clipping. ( The germanium diodes are discontinued, we especially select the Schottky diodes to replicate the waveform clipping )

NUX NOD-1 Horseman Overdrive Pedal “gain” knob is a double potentiometer (a “dual-ganged gain pot”), which controls bass and middle frequencies. Treble and volume are each controlled with separate knobs.

True/Buffer Bypass

NUX NOD-1 Horseman Overdrive Pedal has an optional bypass mode. You can use the pedal in True Bypass mode to keep your signal untouched when the pedal is OFF in the chain.

We highly recommend to select buffer bypass mode if you have more than 4 pedals connected together; switch to Buffer Bypass mode and there will be no signal loss in your pedal chain!

Push and hold the footswitch and power-up the pedal; the LED indicator will show which bypass mode is activated; RED – True Bypass / GREEN – Buffer Bypass.