Rode NTG-1 Condenser Shotgun Microphone

Capture quality sound indoors or outside for your next indie film, TV shoot, or documentary project with the Rode NTG1 shotgun microphone.

Key Features
  • For Indie Films, TV & Documentaries
  • Phantom Powered
  • Selectable 80 Hz Low-Cut Filter
  • Low Handling Noise

38,300

Rode NTG-1 Condenser Shotgun Microphone

38,300

Rode NTG-1 Condenser Shotgun Microphone

The Rode NTG1 shotgun With low handling noise and the ability to endure loud sound sources before distortion, the NTG1 offers a cost-effective solution for recording clean dialogue and sound effects.

The NTG1’s elevated sensitivity allows it to produce strong output levels without having to apply extreme gain at your mic preamp. Sonically, the NTG1 delivers consistently clear sound due in part to its gentle rise in high frequencies and its rumble-reducing selectable low-cut filter. The durable and lightweight high-grade aluminum housing is finished in hard-wearing epoxy paint to withstand the stress of location recording.

Quality Sound Capture

The combination of the NTG1’s 8.6″ long body and supercardioid polar pattern yields focused front-facing directionality and enhanced attenuation of sound entering from the sides. Its low self-noise of 18 dBA and sensitive condenser element communicate detailed audio unburdened by the hiss that plagues many low-cost microphones. Plus, its balanced output allows longer cable runs than most camera-mount shotgun microphones.

Phantom Powered

Thanks to its 3-pin XLR output and compliance with 24V or 48V phantom power, the NTG1 is compatible with a variety of handheld audio recorders, field recorders, and mixer adapters, as well as built-in preamps on many camcorders and cinema cameras.

Ideal for Boompole Mounting

The NTG1 includes a mic clip for easy placement on a mic stand or boompole. Alternatively, mount the NTG1 in the Rode SM4-R shockmount or Rode PG2-R pistol grip (both available separately) to impede the transfer of vibrations in boompole or handheld applications.

Windscreen Minimizes Wind Noise

The NTG1 has a foam windscreen to reduce unwanted wind noise from breezes, fans, heaters, and air conditioners. For maximum reduction of handling noise and wind noise in indoor or outdoor environments, consider the Rode Blimp furry windshield and shockmount suspension system (available separately).

Brand

Form Factor

Stand/Boom-Mount

Sound Field

Mono

Operating Principle

Line Gradient

Capsule

Condenser

Diaphragm

0.5" / 12.70 mm

Polar Pattern

Supercardioid

Orientation

End Address

Circuitry

Solid-State (JFET)

Pad

None

High-Pass Filter

80 Hz, 12 dB/Octave

Tone Adjustment

None

Indicators

None

On-Board Controls

High-Pass Filter

Windscreen

Foam (Included)

Frequency Range

20 Hz to 20 kHz

Maximum SPL

139 dB SPL (1 kHz, 1% THD, 1-Kilohm Load)

Off-Axis Rejection

14 dB at 60°
16 dB at 120°
12 dB at 180° (Off-Axis Rejection at 1 kHz

Impedance

50 Ohms

Sensitivity

-36 dBV/Pa at 1 kHz

Output Level

6.9 mV (Max)

Dynamic Range

121 dB

Signal-to-Noise Ratio

76 dB A-Weighted (1 kHz)

Equivalent Noise Level

18 dB A-Weighted

Output Connectors

1 x XLR 3-Pin

Operating Voltage

24 to 48 V

Mounting

3/8"-16 Female, 5/8"-27 Female, Mic Clip (with Included Hardware)

Dimensions

ø: 0.87 x L: 8.62" / ø: 22 x L: 219 mm

Weight

3.7 oz / 105 g (Microphone)

Package Weight

0.85 lb

Box Dimensions (LxWxH)

10.8 x 5.2 x 2.2"

Reviews

There are no reviews yet.

Be the first to review “Rode NTG-1 Condenser Shotgun Microphone”