M-Audio BX8 D3 8″ Powered Studio Monitor 150W -Single

M-Audio BX8 D3 8 ” 150W Powered Studio Monitor is designed to offer a wide frequency response and easy configuration for mixers, DJs, producers, and recordists in small to medium control rooms, personal studios, and mobile rigs. The monitor produces a frequency response of 37 Hz to 22 kHz, thanks to two Class A/B amplifiers feeding an 8” Kevlar woofer and a 1.25” silk dome tweeter.

A rear-mounted bass port delivers an extended bass response, while the tweeter’s custom waveguide yields a wide sweet spot and minimized high-frequency scatter. Volume and low-frequency controls are provided so you can tune the monitor to cooperate with the sound of the room. Place the monitor on the supplied acoustic foam pad to decouple it from your table or stands, which aids in reducing unwanted bass vibrations.

The M-Audio BX8 D3 Studio Monitor 8″ can interface with a variety of equipment, via balanced XLR and balanced/unbalanced 1/4” TRS input jacks. Setup is simple, due to the front-mounted LED, which appears brighter when you are at the ideal angle.

Drivers

A magnetically shielded 8″ military-grade Kevlar woofer provides durability and detailed transient response whilst negating unwanted “cone breakup.” It has a high-temperature voice coil and damped rubber surround. The magnetically shielded 1.25″ silk dome tweeter delivers high frequencies up to 22 kHz with minimal resonance.

Enclosure

The rear-mounted bass port yields extended bass response while reducing audible air turbulence that can occur at high sound pressure levels. The tweeter sits in a custom waveguide designed to lessen scatter and yield a wide sweet spot. The process of aligning the M-Audio BX8 D3 Studio Monitor 8″ position is simplified, due to the front-mounted LED, which shines brightly when you’re located at the ideal angle.

Amplifiers

The M-Audio BX8 D3 Studio Monitor 8″ has two Class A/B amplifiers, an 80W low-frequency amp, and a 70W high-frequency amp. A crossover at 2 kHz ensures that the correct frequencies are fed to each driver.

Controls

In addition to adjustable volume, there is a low-frequency “Acoustic Space” control. Based on the sound of your room, you may wish to tweak the bass response to achieve a certain frequency balance.

Connectivity

The M-Audio BX8 D3 Studio Monitor 8″ can accept a balanced line-level input at its XLR 3-pin connector. Route balanced or unbalanced signals into the monitor via the 1/4″ TRS jack.